The Oshmo R9T Top Clamp for risers and Motoscope Pro, is inspired  by the BMW Heritage R Nine T Racer, while also being setup for risers.

The Oshmo Racer Top Clamp is Cut from 6061 T6 aircraft grade aluminum.

We chose to use the Motogadget Motoscope Pro instrument as it communicates over a CAN Buss like the factory gauge.

Handle bars are fitted to a set of risers that are mountable to the Top Clamp. Handle bars are available straight or turned back 10 degrees for reduced width.

Oshmo R9T Top Clamp for Risers & Motoscope Pro Available Finishes

Standard finish is brushed natural aluminum.

Also available in anodized matte black or satin black.

Special finishes available at customers request.

Motoscope gauge available separately.

See the matching lower clamp in our products section

Designed and Made in house at Oshmo Los Angeles.

BMW Motorcycle Top Triple Clamp – Brushed Stainless

Here is a stainless steel top clamp for your 1970’s BMW R series Motorcycle. Handsomely machined from T304 Stainless Steel plate. The clamp is thicker than stock for added rigidity. The under side has a slight (1.5mm) counter bore that captures the top of the fork tubes. This design is the answer to the thin steel plate that many complain about. The stock look makes it a perfect upgrade for the rider that wants to keep the original look. No modifications are necessary to your headlight ears. In other words, you don’t have to cut them and this piece will replace your ugly stock piece. Replaces BMW part Number 31 42 1 232 511 – UPPER FORK CROSS BRACE – $80 list price new from BMW. Fits 1970-1980 BMW motorcycles The OSHMO Top Clamp is stronger, less expensive and better looking then BMW. No other modifications necessary to your bike. This part is also available in a polished finish. The Oshmo Top Center Nut is sold separately and available in polished or satin finish. See our other items for the Satin Tripple Clamp and matching Top Nut. Please specify if you would like a /5 model with just the 4 holes drilled for the handlebar mounts or a /6 and newer model with the additional small holes drilled for the instrument bracket.

BMW Triple Clamp Center Steering Nut

The Brushed Stainless Steel Triple Clamp Top Center Steering Nut is made from 318 Stainless Billet. Manufactured in-house on our Hardinge T42 Machine center.

Fits 1970-1980 BMW motorcycles.

Replaces part number 31 42 1 230 478
Please specify if you want the steering dampener hole in the center of the nut.
We will ship without the center hole unless you specify otherwise.

We offer this item in a machine finish or polished.

The price is the same for either as polishing is also done in-house.

Again, please specify if you will be using your steering dampener for the through hole to be prepared. ( add $5.00 ) 
If you plan on retaining the stock BMW steering dampener, you will need the center hole drilled.
If you are making that cleaned up cafe racer or bobber without the steering dampener, we recommend no center hole.

These look great with our offering of upper triple clamps in either polished or stainless. Also, check out our /5 custom triple clamp!

We offer a no-questions-asked warranty on this item. If you are not happy with the fit and finish or any detail for that matter with in 30 days of receiving the item,. send it back on our dime.

The Brushed Stainless Steel Triple Clamp Top Center Steering Nut is made from 318 Stainless Billet. Manufactured in-house on our Hardinge T42 Machine center.

Fits 1970-1980 BMW motorcycles.

Replaces part number 31 42 1 230 478
Please specify if you want the steering dampener hole in the center of the nut.
We will ship without the center hole unless you specify otherwise.

We offer this item in a machine finish or polished.

The price is the same for either as polishing is also done in-house.

Again, please specify if you will be using your steering dampener for the through hole to be prepared. ( Add $5.00 )
If you plan on retaining the stock BMW steering dampener, you will need the center hole drilled.
If you are making that cleaned up cafe racer or bobber without the steering dampener, we recommend no center hole.

These look great with our offering of upper triple clamps in either polished or stainless. Also, check out our /5 custom triple clamp!

We offer a no-questions-asked warranty on this item. If you are not happy with the fit and finish or any detail for that matter with in 30 days of receiving the item,. send it back on our dime.